Ultralight
TrueWood Lite
Solid Oak & Walnut
Solid Bamboo
Paint-Ready
White Oak Ultralight Accent Wall Panel
The flat one. Same veneer, same felt, same 9mm — with nothing cut into the face.
- Continuous veneer face — real wood, wall to wall
- 9mm total depth — the thinnest panel in the range
- No rigid core — veneer on felt, so it follows a curve
- A 3mm shadow reveal at every join — drawn, not hidden
- Five panels per box — 59.06″ of wall covered
In stock — Delivery soon
Perfect for 9ft walls, this full accent panel set offers a sleek, seamless finish with no cutting required. Made of real wood with a white oak tone and backed with black felt, these 9mm thick panels offer a clean, slat-free surface that complements our slat panel collection. Flexible and lightweight, they install easily on flat or curved walls and are ideal for mixing or matching with slatted styles for a cohesive, modern finish.
Features & Benefits
Features & Benefits
It bends, because there is nothing rigid inside it. No MDF, no hardwood backer, no core of any kind — just real wood veneer laminated straight onto 9mm felt. That is what lets a panel follow a curved wall, a column, a cove or the sweep of a stairwell as it comes, with no kerfing, no steaming and no relief cuts. Work from one end and let the panel take the shape of the wall.
Continuous veneer face, clean shadow reveals. This is the quiet member of the range: one continuous plane of timber that reads as material rather than as pattern. It is the panel to reach for when a wall already has a lot going on, or when you want the wood to sit behind the furniture instead of competing with it.
The join is part of the design. Every panel edge is chamfered 1.5mm, so two panels butted together open into a 3mm shadow reveal — a fine, deliberate vertical line every 11.81″. It is the same reveal that runs between the slats on ULTRALIGHT Wide. A flat panel has to meet its neighbour somewhere; this one does it on purpose rather than hoping you will not notice.
It barely takes the room. The whole panel measures 9mm — about the thickness of a pencil lying on its side. Shallow enough for ceilings, door reveals, cabinet fronts and rooms where a deeper profile would read as bulk instead of texture.
Twenty pounds a box. Five panels at 94.49″ come to 20 lbs, 25 lbs at 106″ and 29 lbs at 118.11″ — the same as an ULTRALIGHT Slat box at every height. Still a one-hand carry up a flight of stairs, and still a one-person afternoon on a single wall.
Real wood veneer, not a printed film. Every panel carries the grain of the log it came from, so no two are identical and a run reads as timber rather than as a repeat. On a flat face there is nowhere for that to hide, which is the point.
It runs with the slat panels. Same veneer, same felt, same 9mm depth, the same panel heights and the same 3mm reveal as ULTRALIGHT Wide. So a wall can go flat behind the bed and slatted either side of it, and the two meet at the same plane with nothing to pack out.
59.06″ of wall in one box. Five panels, 11.81″ each — the widest coverage per box we sell. Fewer boxes on the order and fewer joins to set on the wall.
Materials & Construction
Materials & Construction
The face. Real wood veneer, laminated directly onto the felt with nothing between the two — no MDF, no plywood, no core. The veneer runs unbroken across the panel, which is the whole difference between this and a slat panel: there is nothing cut into it.
The backing. 9mm recycled acoustic felt.
The edges. Each panel is chamfered 1.5mm wide and 1.5mm deep along its left and right edge — a 45° cut. Butt two panels together and the two chamfers close into a single 3mm wide, 1.5mm deep shadow reveal at 90°, with 7.5mm of felt left intact beneath it. No lip, no overlap and nothing to align.
The measurements. A panel is exactly 300mm wide (11.81″) and 9mm deep, of which 297mm is flat veneer face and the remaining 3mm is the two chamfers. Because nothing is lost to a lap, a panel covers its full 300mm once installed and five of them come to exactly 1500mm — 59.06″.
On sound. We do not publish an absorption rating for Accent, and we would rather say so than imply one. The felt sits behind an unbroken veneer face, so sound does not reach it the way it does through the open grooves of a slat panel. If absorption is what you are after, run Accent alongside ULTRALIGHT Slat or Wide on the same wall — they share the same depth and heights, so the two sit flush.
Sizing & Coverage
Sizing & Coverage
| Panel height | Width per box | Coverage per box |
|---|---|---|
| 94.49″2400mm | 59.06″ 1500mm | 38.75 sq ft |
| 106″2693mm | 59.06″ 1500mm | 43.48 sq ft |
| 118.11″3000mm | 59.06″ 1500mm | 48.44 sq ft |
Only the height changes — every box is 59.06″ wide. To work out how many you need, divide your wall width in inches by 59.06 and round up: a 10-foot wall (120″) takes three boxes. Each panel has a 1.5mm chamfer on both edges, so panels butt together into a 3mm shadow reveal and every 300mm panel covers the full 300mm of wall — nothing is lost to an overlap.
Installation & Care
Installation & Care
Before you start. Work out your box count first: each box covers 59.06″ of wall width, so divide your wall width in inches by 59 and round up — a ten-foot wall takes three boxes. Order it all at once so every panel comes from the same production run; veneer varies batch to batch, and on a flat face that variation has nowhere to hide.
Plan where the reveals land. A 3mm reveal falls every 11.81″. Before you fix anything, dry-lay the run and decide where the first panel starts — centring the run on the wall, or on the bed or sofa in front of it, looks more deliberate than starting hard in a corner and leaving an offcut at the far end.
Mounting — adhesive, not screws. Accent goes up with construction adhesive, straight onto drywall, plaster or timber, with no battens or subframe to build first. Screws are not an option on this panel: the only break in the face is the 3mm shadow reveal at a join, and there is nowhere to seat a screw head without putting it through the veneer. Run vertical beads down the back of the panel, set it, and press the whole face home.
Finishing nails, if you want them. Once two panels are butted and the reveal is closed, a finishing nail can go straight down the middle of that 3mm reveal and into the wall. It is a useful way to hold a join tight while the adhesive cures, or to pull in a panel that is sitting proud of an uneven wall. The head disappears into the shadow line. Nails go in after the panels are together, never before — they are there to hold a join, not to carry the panel.
Curves. The panel follows a gentle curve as it comes. Fix one end first, then work along the curve fixing as you go and letting the panel take the shape of the wall — do not flatten it out and try to bend it afterwards.
Butting panels. Push each panel up tight against the last one. The two 1.5mm chamfers close into one even 3mm reveal, so keep the join closed rather than leaving a gap — the reveal is already built in, and any gap on top of it shows. A finishing nail in the reveal will hold a stubborn join closed while the adhesive takes.
Cutting. A fine-tooth blade through the veneer face and a sharp knife through the felt. Score the veneer first and cut on the waste side. For height, cut from the bottom so the factory edge stays at eye level. If you have to rip a panel narrower, take it off the edge that will sit in the corner so the chamfered edge stays on the visible join.
Care. Dust the veneer with a dry or barely damp cloth, following the grain, and run a soft brush along the reveals. Skip solvents, wax and steam. Indoor use only — not for bathrooms with a shower, saunas, or anywhere outdoors.
You’re in good company.
300933+ sq ft of our panels are already up in 2500+ homes & businesses across all 50 states. Join them. ★★★★★4.9 from 293 reviews
Why Ultralight Accent
Real wood, wall to wall
A continuous veneer face on the same 9mm felt backbone, so it still bends, still weighs almost nothing and reads as one plane of timber.
Bends to the curve
No MDF, no rigid core. It follows curved walls, columns and coves with no kerfing or relief cuts.
A 3mm line, on purpose
Each edge has a 1.5mm chamfer, so two panels meet in a 3mm shadow reveal, drawn rather than hidden.
59″ of wall per box
Five panels to a box. Fewer boxes to order, fewer joins to set on the wall.
A one-person install
Light enough to hold with one arm and fix with the other. No helper needed.
The details
Product specification
Actual milled dimensions, not nominal ones.
Real wood veneer laminated straight onto 9mm recycled felt — no MDF, no hardwood, no rigid core of any kind, and nothing cut into the face. Each edge carries a 1.5mm chamfer, so two butted panels close into a 3mm shadow reveal — the join is drawn, not hidden. Five panels make one box: 11.81″ each, 59″ of wall width together.
By length
Per box of 5 panels, by the height you pick.
| 94.49″7′10″ tall | 106″8′10″ tallSelected | 118.11″9′10″ tall | |
|---|---|---|---|
| Coverage | 38.75 sq ft | 43.48 sq ft | 48.44 sq ft |
| Weight | 20 lbs | 25 lbs | 29 lbs |
Construction
Panel size
Box & install
FAQ
Ultralight Accent questions
Pick a topic, or search all 32 answers.
Still stuck? Ask us anything about your wall. We’re real people in Garden Grove, CA, not a bot.
Sizing & boxesHow many boxes of Ultralight Accent do I need?
Measure the width of your wall in inches and divide by 59 — each box covers 59.06″ of wall width, or 1500mm. Round up, because the offcut from the last panel usually finds a use elsewhere on the wall. A ten-foot wall (120″) takes three boxes. A sixteen-foot wall (192″) takes four. If you are unsure, send us your measurements and we will work it out with you.
Enter your wall width to see how many boxes.
Rounded up to whole boxes for one wall at full panel height. Add a box if you’ll cut around windows or doors.
Sizing & boxesHow wide is one Ultralight Accent panel?
Each panel is 11.81″ wide — 300mm. Of that, 11.69″ is flat veneer face; the remaining 3mm is the 1.5mm chamfer along each edge. Because the panels butt with no lip and no overlap, a panel covers the full 11.81″ once installed. There is nothing to subtract for a lap.
Sizing & boxesWhat sizes do Ultralight Accent panels come in?
Three heights: 94.49″ for eight-foot walls, 106″ for nine-foot walls and 118.11″ for ten-foot walls. All three are 11.81″ wide per panel, five panels to a box, covering 59.06″ of wall width.
Sizing & boxesHow many panels are in a box of Ultralight Accent?
Five panels. Each panel is 11.81″ wide, so a box covers 59.06″ of wall width — the widest coverage per box Slats.co sells. By height that works out to 38.75 sq ft at 94.49″, 43.48 sq ft at 106″ and 48.44 sq ft at 118.11″.
Sizing & boxesHow much does a box of Ultralight Accent panels weigh?
20 lbs at 94.49″, 25 lbs at 106″ and 29 lbs at 118.11″ — five panels to a box, the same as an Ultralight Slat box at each height. You can still carry a box up a flight of stairs in one hand and hold a panel flat against the wall with one arm while you fix it with the other.
Sizing & boxesHow thick are Ultralight Accent panels?
Ultralight panels are 9mm thick in total — about 0.35 of an inch. That is the veneer face and the acoustic felt together, because there is no core between them.
It is the shallowest panel Slats.co sells, which makes it workable on ceilings, in door reveals and anywhere a deeper panel would read as bulk rather than texture.
Sizing & boxesDoes Ultralight Accent have slats?
Accent has a continuous veneer face: real wood across the full width of every panel, with a 3mm shadow reveal where one panel meets the next, every 11.81″. For a slatted look, Ultralight Slat has seven slat faces per panel and Ultralight Wide has broad 3.82″ faces.
InstallCan Ultralight Accent panels bend around a curved wall?
Yes. Because there is no rigid core, an Ultralight panel follows a gentle curve as it comes — no kerfing, no steaming and no relief cuts.
It works on curved walls, columns, coves, bulkheads and the sweep of a stairwell. Fix from one end and let the panel take the shape of the wall rather than trying to flatten it first.
InstallHow do Ultralight Accent panels join together?
They butt straight into each other. Each panel edge is chamfered 1.5mm wide and 1.5mm deep, so when two panels meet the two chamfers close into a single 3mm shadow reveal, 1.5mm deep, with 7.5mm of felt left intact beneath it. There is no lip, no overlap and nothing to align — push the next panel up tight against the last and the reveal sets itself. It is the same 3mm reveal that runs between the slats on Ultralight Wide.
InstallHow do you install Ultralight Accent panels?
With construction adhesive, straight onto drywall, plaster or timber — no battens, no subframe. Screws are not used on Accent: the only break in the face is the 3mm shadow reveal at a join, so there is nowhere to seat a screw head without driving it through the veneer. Run vertical beads down the back of each panel, set it, and press the whole face home. Start from one end, check the first panel is plumb, then butt each following panel up tight against the last. Once two panels are together, a finishing nail can go down the middle of the 3mm reveal to hold the join while the adhesive cures — the head disappears into the shadow line.
InstallDo Ultralight Accent panels need a batten or frame behind them?
No. Accent fixes straight to the wall surface — drywall, plaster or timber — with construction adhesive. No battens, no furring strips and no subframe. That is part of why the panel only takes 9mm off the room. On a curved or uneven surface, fixing straight to the wall also lets the panel follow the shape rather than bridging it.
InstallCan Ultralight Accent panels be installed on a ceiling?
Yes. At 9mm thick and 20 lbs a box at 94.49″, Accent is straightforward to take overhead. Use construction adhesive and prop or brace each panel while it cures — overhead is the one place you cannot rely on the panel to hold itself while the adhesive grabs. Finishing nails through the 3mm reveal at each join help hold the run up in the meantime. Work along one line so the reveals stay continuous and parallel across the span.
InstallCan Ultralight Accent panels be cut to size?
Yes. Cut the veneer face with a fine-tooth blade and the felt with a sharp knife, scoring the veneer first and cutting on the waste side. For height, cut from the bottom so the factory edge stays at eye level. If you have to rip a panel narrower, take it off the edge that will sit in the corner — that keeps the factory chamfer on the visible join.
InstallHow do I cut Ultralight Accent around outlets and light switches?
Mark the opening on the face of the panel, then cut the veneer with a sharp knife or a fine-tooth blade and peel the felt back behind it.
Because the felt is only 9mm and has no rigid core, it cuts cleanly without chipping or blowing out the back. A cover plate sits over the edge and hides the cut.
InstallCan I mount a TV or shelves on Ultralight Accent panels?
Yes, but fix into the wall behind, never into the panel. Accent is veneer on felt with no rigid core, so it carries no structural load at all. Locate your studs before you panel, mark them, then run your bracket fixings through the panel and into the stud.
MaterialsWhat is an Ultralight Accent panel?
Ultralight Accent is a flexible real wood wall panel with a flat face. Real wood veneer is laminated straight onto 9mm recycled felt, and the face is left whole — one continuous plane of timber from edge to edge. There is no MDF, no hardwood backer and no rigid core of any kind, which is what keeps it light and lets it follow a curve. Each panel is 11.81″ wide. Five panels come in a box and cover 59.06″ of wall width.
MaterialsDo Ultralight Accent panels have an MDF core?
No. Ultralight Accent has no MDF, no particle board, no plywood and no hardwood backer — there is no core at all. The wood veneer is laminated directly onto 9mm recycled felt. That is the reason the panel is light enough to handle alone and flexible enough to follow a curve. Slats.co panels with a hardwood core, such as TrueWood and the Solid line, are built differently and suit different jobs.
MaterialsIs Ultralight Accent real wood?
Yes. The face is real wood veneer, not a printed film or a photographic laminate.
Because it is real wood, the grain varies from panel to panel and from batch to batch. That is worth knowing if you are matching an order placed months apart — order the whole wall together where you can.
MaterialsWhat finishes do Ultralight Accent panels come in?
White Oak, Walnut and Grey Oak, each over black felt. Availability varies by height — Grey Oak is currently 94.49″ only. Because the face is unbroken, the veneer is doing all of the work on an Accent wall: it is worth ordering a sample and seeing the grain in your own light before you commit a whole wall to it.
MaterialsDo Ultralight Accent panels absorb sound?
Not the way the slat panels do, and we would rather say so. On a slat panel the grooves open the felt to the room; on Accent the felt sits behind an unbroken veneer face, so sound does not reach it in the same way. Slats.co does not publish an NRC rating for any Ultralight panel and will not quote one here. If absorption is what you need, run Accent alongside Ultralight Slat or Wide — same depth, same heights, so the two sit flush on one wall.
MaterialsAre Ultralight Accent panels fire-rated?
Our panels are not fire rated. If a fire rating is required for your project, check with your contractor or your local building code before ordering.
MaterialsCan Ultralight Accent panels be painted or stained?
We do not recommend it. The face is a thin real wood veneer, and stain lifts unevenly while paint fills the reveals and flattens the crisp line between panels. If you want a painted finish, the Paint-Ready line is made for exactly that — it ships pre-primed white and is designed to be painted in your own color.
MaterialsWill Ultralight Accent panels expand or contract?
No meaningful movement. There is no solid timber and no MDF in the panel, so there is nothing to swell or shrink with humidity the way a cored panel can.
You do not need expansion gaps at the joins. Butt the panels tight and they stay tight.
MaterialsAre Ultralight Accent panels eco-friendly?
The 9mm felt backing is recycled acoustic felt. The panels are independently tested to meet low-VOC standards. Slats.co also plants a tree for every panel sold. And because Accent uses veneer rather than solid timber, a given log covers far more wall.
Shipping & careHow much does shipping cost on Ultralight Accent panels?
Shipping is free to the contiguous U.S. on most Ultralight orders. The exceptions are samples, and 118.11″ panels ordered in quantities of 1 to 3 boxes, where shipping is calculated at checkout.
Order 4 or more boxes of 118.11″ panels and shipping is free. The 118.11″ boxes are long enough to move by freight rather than parcel, which is why the carrier rate shows up on smaller orders.
Shipping & careHow long do Ultralight Accent panels take to arrive?
Most Ultralight orders leave the warehouse within one to two business days, with delivery to the contiguous U.S. typically inside a week.
Freight shipments of 118.11″ panels take longer and are booked with a delivery appointment. The delivery estimate on the product page reflects the current lead time for the size and finish you are looking at.
Shipping & careCan Ultralight Accent panels be used in a bathroom or outdoors?
Ultralight is for indoor use only. It is not suitable for outdoors, saunas, or bathrooms with a shower or bath in the same room.
A powder room with good ventilation and no shower is usually fine. Wood veneer and felt both take on moisture, and neither recovers well once they have.
Shipping & careHow do I clean Ultralight Accent panels?
Dust the veneer with a dry or barely damp cloth, following the grain, and run a soft brush along the reveals between panels. No solvents, no wax, no polish and no steam. If something is spilled, blot it up rather than wiping across.
Shipping & careCan I take Ultralight Accent panels with me if I move?
No — plan on Accent staying put. It is fixed with construction adhesive, which is not intended to come off cleanly, and there is no screw option on this panel because a flat face has nowhere to seat a screw head. If you want panels that come down again, Ultralight Slat fixes with screws that sit inside the grooves: back them out, lift the panels down and fill the holes.
Shipping & careAre Ultralight Accent panels renter-friendly?
Not especially, and we would rather be straight about it. Accent goes up with construction adhesive, so taking it down again means damage to the wall behind. If you are renting, Ultralight Slat is the panel to look at — it fixes with screws that seat down inside the grooves, so it comes off again and the patches are small. Check your tenancy agreement on wall fixings either way.
Shipping & careDoes Slats.co offer Ultralight Accent samples?
Yes. Individual Ultralight Accent samples are $3.99 each, and the full sample kit is $30. Worth doing on a flat panel especially — veneer color shifts under different light, and on a continuous face the grain is the entire surface.
Shipping & careWhere is Slats.co based?
Slats.co is a Southern California company, shipping across the contiguous United States.
If you want to talk to a person about a wall, text us on (833) 657-7116 or start a chat — real humans, not a bot.
Reviews
What Ultralight Accent owners say
Everything about this company is absolutely outstanding! Quality of the bamboo slats was top notch with excellent, consistent coloring of wood across over 21 feet of slats; customer service answering questions was responsive, clear, courteous, and spot on; the shipping was fast and each pair of slat panels was separately boxed and well-protected so there was ZERO damage to the slats; the installation using circular saw, jig saw, and drill was easy, just like YouTube described. I was worried that cutting the slats would cause splintering, but painter's tape prevented that. I shopped around for two months looking at various companies and wood slats. This company stood out for their solid bamboo slats in 1 foot wide panels from California. The company's attention to detail and superb customer service only made the experience so much more satisfying. But the best part was the final result: the slat panels completely transformed a cold, blank wall into a warm backdrop for our art and Frame TV.
Slats.co makes such an amazing product! I cut and installed their wall panels in my home office in one day and it completely transformed my office into a quiet, warm, inviting, and professional workspace. I cannot say enough about this amazing product! Thank you Slats.co!!
Felt backing and the slats itself are good material. I ordered 3 boxes, out of which 1 had stapled slats on felt while other 2 were glued. The staples one became loose at few points and cutting them was difficult as loose pieces came out. I had to glue them back. I believe they updated the process and now glueing them on the felt which is much better. I would recommend getting the glued on panels instead of staples.
Lite version looks good but I wish they made regular version for long lengths too. Overall, I am happy how they look on the wall - Get the truewood!
VERY happy with this purchase! Excellent product quality, easy installation, and superb customer service! The wood has dimension to it and looks great, especially in a room with a lot of natural light. Highly recommend!
We had a great paper white room hat needed a feature wall to make it pop. So after a ton of research, we figured we needed the Ultralight Walnut version, and we are so glad we did. We are so addicted to the outcome that we have identified two more rooms/walls to do the same, and we ordered 5 more boxes!
Overall I am happy with the new slats. The veneer is extremely thin and I had to be careful not to chip it simply handling them during cutting and install. They did cut well on my table saw. They look great installed, but I'm not expecting years of durability. If the veneer was even a 16th of an inch, I'd give them 5 stars.
These were just what I was imagining my plain-walled office space needed. Having virtual meetings with an empty white space behind me was getting old and I didn't want to just hang shelves. Enter Slats and I now have the visual interest I needed (with the help of a couple framed pictures). Perfect in every way!
I had a wall that was a little boring and the room on the other side, sometimes complained about noise. It was easy to cover the entire wall with these, and I just used a box cutter, ruler, and finishing nails.
They look beautiful and work well at damping sound. Shipping was quick, and the product was nicely packaged.
Fantastic product!
Beautiful real solid Walnut hardwood. Surface feels smooth and solid. Natural minor warping, but not a problem after glued and mounted to wall.
Super nice! Just what I was hoping for and they look really classy. The black felt and gray oak is a great combo. These are perfect for our .5" thick trim.
Pleased with the quality and the ease of installation with the product.
Slats has been very helpful with a miss order on my part and resolved my order.
It’s been installed and looks great.
Dark Smoke Oak TrueWood Lite 3-Sided Veneer Acoustic Slat Panel
Very easy to put up and looks amazing
Beautiful wood ! Easy to install only thing that i dislike is the slats come loose. Needsmore staples and maybe glue to hold the slats on . I worked around that prby gluing and tapping the slats that came off.
Could not be happier with American Walnut TrueWood Lite 3-Sided Veneer Acoustic Slat Panel. The order arrived within days. It is a high quality product. The slates went up easily and added a rich look to an otherwise plain room. Will definitely order again for future projects!
American Walnut TrueWood Lite 3-Sided Veneer Acoustic Slat Panel is a great product. Easy install with construction adhesive. Used my trac saw to cut the slats and it worked great both horizontal and vertical. Staining was easy due to the three-sided veneer. Matches perfectly to my black walnut dining table. Slatsco offered great customer service. Can't wait to install some of their other great products.
I absolutely love these slats! The quality is fantastic, and they look beautiful once installed. They’re also surprisingly easy to work with — easy to cut to size, and you can attach them to the wall using adhesive or nails.
One tip: be a little careful when taking them out of the box and handling them before installation, as you don’t want to accidentally bend them.
What really stood out to me was the customer service. Truly A+++! They are incredibly kind, genuine, helpful, and very fast to respond. You can really tell there are real people behind this company who care about their customers.
I also love supporting a small, family-owned business, especially when both the product and service are this good. I would absolutely purchase from them again and highly recommend them to anyone considering these slats!
Great quality product, uniform and clean all around.
ULTRALIGHT Flexible Lightweight White Oak Acoustic Wood Slat Wall Panels with Beige Felt Backing
Very easy to use. Fast shipping. A great easy upgrade to any room!
Took for ever to get them (3 months) even though it says 5 to 7 days shiping
Overpriced. Bed material
They scratch and broke while we were profesionaly installed
Do not rekomend
If posible I will give them -5 ⭐️
Thank you for taking the time to share your feedback — we're truly sorry your experience didn't meet expectations.
Your order was for a pre-order item, which we communicated at the time of purchase and followed up on directly. Our 5-7 day shipping applies to in-stock products, and we completely understand how frustrating the wait can be when you're eager to get your project started.
Throughout your order we did our best to keep communication open and transparent — we shipped complimentary samples via expedited shipping so you could see the product while you waited. We even shipped you another box of the panels at no additional cost. We truly tried our best to make things right.
We genuinely want every customer to have a great experience, and we're sorry we fell short for you. If there's anything else we can do, please let us know! We are truly open to hearing from you.
Very light weight and easy to install. A great product. I did order the $30 sample pack and it said you would get 30. Off your order but I didn’t see anyway to get the 30 taken off on my order.
Lovely well packaged panels that added pizazz to my accent wall.
Also in White Oak
Same look, other styles
Like this finish? Here it is as slats, plus the closest oak tones in our real-wood lines.
Ultralight Slat · White Oak
1.2″ slats · Oatmeal felt
Ultralight Wide · White Oak
3.8″ wide slats · Beige felt
TrueWood Lite · Natural Oak
3-sided real wood veneer slats
Solid · American Oak
100% solid oak slats