Ultralight
TrueWood Lite
Solid Oak & Walnut
Solid Bamboo
Paint-Ready
Shop by line
Bamboo Acoustic Slat Panels
Every slat is 100% solid bamboo, milled all the way through and set on recycled acoustic felt. Bamboo grows fast and regrows without replanting, which makes this our most sustainable panel.
Natural Soft blonde bamboo that keeps a room light and warm.
2 bamboo colors
Compare Natural and Medium Brown
The same solid bamboo slat in two colors. Pick the tone that suits the room.
Medium Brown
Solid bamboo in a warm mid-brown. Cosy without going dark.
Shop Medium Brown
Why bamboo
Bamboo grows fast and regrows without replanting, which makes this our most sustainable panel. Every slat is 100% solid bamboo, milled all the way through, with no veneer and no core.
Want oak or walnut all the way through? That's the Solid Series. Want a panel light enough to bend? That's Ultralight.
All bamboo
Shop every bamboo panel
Not sure on the color?
See it in your own light
Solid sample kit, $30. See the real wood and felt at home.
Get the sample kit
Not sure on the color?
See it in your own light
Solid sample kit, $30. See the real wood and felt at home.
Get the sample kit
Plan your wall
How many boxes do I need?
Pick your ceiling height and enter your wall width. We'll work out the boxes and price for each color.
Volume discounts available on 9 and 12 ft panels.
Rounded up to whole boxes for one wall at full panel height. Add a box if you'll cut around windows or doors.
See the difference
Put them side by side, at home
Order both colors and compare them on your own wall, in your own light.
Shop all samples
Installation
How they go up
The steps, or download the full guide as a PDF.
Acclimate, then adhesive, screws or both
- Acclimate 48–72 hours
Unbox and lay the panels flat on the floor of the room they're going in, out of the packaging and away from direct sun and heat. Don't stand them on end.
- Lead with the lip
Each panel has a bare felt lip on one edge and an overhanging slat on the other. Face every lip the way you're working.
- Fix it
Construction adhesive, or #6 or #8 screws (1.5–2″, trim-head) through the felt gap. Or both for extra hold. Save the flattest panels for the most visible spots.
- Lap the next panel
Each panel has a 1″ felt lip on one edge; on the other, the last slat overhangs its felt by ½″. Lower each new panel so that overhang drops over the last panel's lip, and the gap at the join matches the gaps between slats.
You'll need
- Drill / driver (cordless is best)
- #6 or #8 screws, 1.5–2″ (trim-head for a cleaner look)
- Construction adhesive, instead of or as well as screws
- 4 ft level or a laser, and a pencil
- Tape measure
- Stud finder or wall anchors
- Track, circular or hand saw with a fine-tooth blade
- Utility knife, for felt cuts
Cutting tips
- Cut to length with a track, circular or hand saw and a fine-tooth blade. Cut to width by slicing the felt in a gap with a utility knife: whole slats come away, no saw needed.
- Run painter's tape along the cut line before you saw, so the face doesn't splinter at the edge of the cut.
- Don't rip a slat lengthwise. Take whole slats off instead.
- Outlets and switches: a jigsaw or multi-tool through the slats, a utility knife through the felt.
About this line
Good to know
The real thing, all the way through. Each slat is milled from 100% solid bamboo — no veneer, no core — set on recycled acoustic felt to soften echo and warm up a room. It's the most sustainable panel we make. Available in Natural or Medium Brown, and installs with just screws or construction adhesive.