Ultralight Slat Wall Panels
The original Ultralight: real wood veneer on 9mm recycled felt, cut into 1.2″ slats. Light enough to hang on your own, flexible enough to bend around a curve.
Real wood Real wood veneer, not printed laminate, over soft felt that softens echo.
5 Ultralight Slat finishes
Compare Ultralight Slat finishes
Same 1.2″ slat in every finish, from the lightest white oak to near-black.
White Oak
Real wood veneer stained a white oak tone, our lightest oak, on 9mm felt. It bends.
Shop White Oak
Walnut
Real wood veneer stained a walnut tone, on 9mm acoustic felt. No rigid core, so it bends.
Shop Walnut

Dark Smoke Oak
Real wood veneer stained a smoky dark oak tone, on 9mm felt. It bends.
Shop Dark Smoke Oak
Black Oak
Real wood veneer stained a near-black oak tone, on 9mm felt. It bends.
Shop Black Oak
Why Ultralight
Ultralight is real wood veneer laminated straight onto 9mm recycled acoustic felt. No MDF and no rigid core, so a whole box is light enough to carry in one hand and a panel bends around a curved wall.
Slat is the original 1.2″ slat. Wide cuts the same build into broad 3.8″ faces. Accent is one continuous veneer face, real wood wall to wall.
All Ultralight Slat
Shop every Ultralight Slat panel
Not sure on the color?
See it in your own light
ULTRALIGHT sample kit, $30. See the real wood and felt at home.
Get the sample kit
Not sure on the color?
See it in your own light
ULTRALIGHT sample kit, $30. See the real wood and felt at home.
Get the sample kit
You’re in good company.
305679+ sq ft of our panels are already up in 2500+ homes & businesses across all 50 states. Join them. ★★★★★4.9 from 293 reviews
Plan your wall
How many boxes do I need?
Pick your ceiling height and enter your wall width. We'll work out the boxes and price for each line.
Volume discounts available on 9, 10 and 12 ft panels.
Rounded up to whole boxes for one wall at full panel height. Add a box if you'll cut around windows or doors.
See the difference
Put them side by side, at home
Order the samples and compare them on your own wall, in your own light.
Shop all samplesInstallation
How they go up
Pick your line for the steps, or download the full guide as a PDF.
Trim-head screws, adhesive or both
- Plan the wall
Measure the wall and work out how many boxes you need. Start at the most visible corner and draw a plumb line.
- Fix the first panel
Trim-head screws through the felt in the outermost groove at each edge, rows no more than 30″ apart (a bugle or pan head is too wide and sits proud). Or construction adhesive, or both.
- Butt the next panel up
Each end carries half a V-groove. Push until the 45° chamfers seat and the two halves close into one full groove that matches the rest. No lip, no overhang.
- Curves and columns
No rigid core, so Ultralight bends across the slats around curves and columns. Use adhesive and start from the tightest part of the curve.
You'll need
- Drill / driver (cordless is best)
- Trim-head screws
- Construction adhesive, instead of or as well as screws
- 4 ft level or a laser, and a pencil
- Tape measure
- Stud finder or wall anchors
- Sharp utility knife (does both cuts)
- Fine-tooth saw blade (optional)
Cutting tips
- A utility knife and a straight edge are all you need. Score along the line, and a few passes give a splinter-free edge.
- Practice on an offcut first. It's easy to drift off a straight line.
- Cutting several panels? A circular saw is faster. Put painter's tape on the cut line and use a fine-tooth blade with 60+ teeth.
- Sizing the felt only? A razor blade does it.
- Outlets and switches: a jigsaw, multi-tool or sharp utility knife all work.
About this line














Ultralight
TrueWood Lite
Solid Oak & Walnut
Solid Bamboo
Paint-Ready










































