Ultralight
TrueWood Lite
Solid Oak & Walnut
Solid Bamboo
Paint-Ready
Ultralight Wide Slat Wall Panels
The flexible Ultralight build cut into three broad 3.8″ faces with a 3mm shadow reveal. A bolder, calmer wall.
Quiet The felt backing softens echo and reverb, so the room sounds as warm as it looks.
3 Ultralight Wide finishes
Compare Ultralight Wide finishes
Same 3.8″ faces in every finish.
White Oak
The same flexible white-oak-tone build, cut into three broad faces with a 3mm shadow reveal.
Shop White Oak
Walnut
The same flexible walnut-tone build, cut into three broad faces with a 3mm shadow reveal.
Shop Walnut
Dark Smoke Oak
The same flexible build, cut into three broad faces with a 3mm shadow reveal.
Shop Dark Smoke Oak
Why Ultralight
Ultralight is real wood veneer laminated straight onto 9mm recycled acoustic felt. No MDF and no rigid core, so a whole box is light enough to carry in one hand and a panel bends around a curved wall.
Slat is the original 1.2″ slat. Wide cuts the same build into broad 3.8″ faces. Accent is one continuous veneer face, real wood wall to wall.
All Ultralight Wide
Shop every Ultralight Wide panel
Not sure on the color?
See it in your own light
ULTRALIGHT Wide sample kit, $15. See the real wood and felt at home.
Get the sample kit
Not sure on the color?
See it in your own light
ULTRALIGHT Wide sample kit, $15. See the real wood and felt at home.
Get the sample kit
Plan your wall
How many boxes do I need?
Pick your ceiling height and enter your wall width. We'll work out the boxes and price for each line.
Volume discounts available on 9, 10 and 12 ft panels.
Rounded up to whole boxes for one wall at full panel height. Add a box if you'll cut around windows or doors.
See the difference
Put them side by side, at home
Order the samples and compare them on your own wall, in your own light.
Shop all samples
Installation
How they go up
Pick your line for the steps, or download the full guide as a PDF.
Construction adhesive only
- Plan the wall
Measure the wall and use the box calculator above.
- Fix with construction adhesive
Adhesive only: the 3mm shadow reveal can't seat a screw head.
- Butt the next panel up
Each edge has a 1.5mm chamfer, so two panels form one 3mm shadow reveal.
- Optional: finishing nails
Once panels are joined, finishing nails can go down the middle of the shadow reveal.
You'll need
- Tape measure and level
- Construction adhesive
- Finishing nails (optional)
Cutting tips
- A utility knife and a straight edge are all you need. Score along the line, and a few passes give a splinter-free edge.
- Practice on an offcut first. It's easy to drift off a straight line.
- Cutting several panels? A circular saw is faster. Put painter's tape on the cut line and use a fine-tooth blade with 60+ teeth.
- Sizing the felt only? A razor blade does it.
- Cutouts for light switches and outlets: use a jigsaw.
About this line