Ultralight
TrueWood Lite
Solid Oak & Walnut
Solid Bamboo
Paint-Ready
Shop by line
Ultralight Slat Panels
Real wood veneer on 9mm recycled felt, light enough to hang on your own and flexible enough to bend around a curve. Three profiles: Slat, Wide and Accent.
Flexible Real wood veneer on 9mm recycled felt, so the panel bends to follow curved walls.
3 Ultralight profiles
Compare Ultralight Slat, Wide and Accent
The same light, flexible build in three faces. Pick the profile, then the finish.
Ultralight Slat
The original: real wood veneer on 9mm felt, cut into 1.2″ slats. It bends.
Shop Ultralight Slat
Ultralight Wide
The same flexible build, cut into three broad 3.8″ faces with a 3mm shadow reveal.
Shop Ultralight Wide
Ultralight Accent
One continuous veneer face on felt. Real wood, wall to wall.
Shop Ultralight Accent
Why Ultralight
Ultralight is real wood veneer laminated straight onto 9mm recycled acoustic felt. No MDF and no rigid core, so a whole box is light enough to carry in one hand and a panel bends around a curved wall.
Slat is the original 1.2″ slat. Wide cuts the same build into broad 3.8″ faces. Accent is one continuous veneer face, real wood wall to wall.
All Ultralight
Shop every Ultralight panel
Not sure on the color?
See it in your own light
ULTRALIGHT sample kit, $30. See the real wood and felt at home.
Get the sample kit
Not sure on the color?
See it in your own light
ULTRALIGHT sample kit, $30. See the real wood and felt at home.
Get the sample kit
Plan your wall
How many boxes do I need?
Pick your ceiling height and enter your wall width. We'll work out the boxes and price for each line.
Volume discounts available on 9, 10 and 12 ft panels.
Rounded up to whole boxes for one wall at full panel height. Add a box if you'll cut around windows or doors.
See the difference
Put them side by side, at home
Order the samples and compare them on your own wall, in your own light.
Shop all samples
Installation
How they go up
Pick your line for the steps, or download the full guide as a PDF.
Wood screws or construction adhesive
- Plan the wall
Measure the wall and work out your boxes with the calculator above.
- Fix the first panel
Wood screws (#6 or #8, 1.5–2″) through the felt between the slats, with trim-head screws for the cleanest look. Or use construction adhesive.
- Butt the next panel up
Each end carries half a V-groove, so two panels close into one full groove that matches the rest. No lip, no overhang.
- Curves and columns
No rigid core, so Ultralight bends around curves and columns as it goes up.
You'll need
- Tape measure and level
- #6 or #8 wood screws, 1.5–2″ (trim-head)
- Or construction adhesive
Cutting tips
- A utility knife and a straight edge are all you need. Score along the line, and a few passes give a splinter-free edge.
- Practice on an offcut first. It's easy to drift off a straight line.
- Cutting several panels? A circular saw is faster. Put painter's tape on the cut line and use a fine-tooth blade with 60+ teeth.
- Sizing the felt only? A razor blade does it.
- Cutouts for light switches and outlets: use a jigsaw.
Construction adhesive only
- Plan the wall
Measure the wall and use the box calculator above.
- Fix with construction adhesive
Adhesive only: the 3mm shadow reveal can't seat a screw head.
- Butt the next panel up
Each edge has a 1.5mm chamfer, so two panels form one 3mm shadow reveal.
- Optional: finishing nails
Once panels are joined, finishing nails can go down the middle of the shadow reveal.
You'll need
- Tape measure and level
- Construction adhesive
- Finishing nails (optional)
Cutting tips
- A utility knife and a straight edge are all you need. Score along the line, and a few passes give a splinter-free edge.
- Practice on an offcut first. It's easy to drift off a straight line.
- Cutting several panels? A circular saw is faster. Put painter's tape on the cut line and use a fine-tooth blade with 60+ teeth.
- Sizing the felt only? A razor blade does it.
- Cutouts for light switches and outlets: use a jigsaw.
About this line
Good to know
Our signature acoustic wood slat panels redefine flexibility in form and function. Just 9mm thin, yet rich in depth and character, they install easily on flat or curved surfaces alike. Available in white oak or walnut, each ultralight panel offers real wood texture with felt backing for warmth, contrast, and exceptional acoustic performance. Choose from three precisely engineered sizes to fit standard 8ft, 9ft, and 10ft wall heights—making installation seamless and design beautifully scalable.